Let’s face it, if you own and drive an original S4 or S6 you’ve got an old car. These cars are special and in many cases they have been maintained to high standards thanks to enthusiastic owners. Unfortunately, that isn’t always the case so some cars end up looking, well, a bit tired.
I’ve known the owner of this black S6 online for quite sometime but only recently had the opportunity to connect with him in person at the Glacier Lakes Quattro Club Spring Ice Out event. The owner (Tom) drives a nicely tuned black UrS6 that at the time of this posting is going on 260,000+ miles! Mechanically the car it doing well but the paint has certainly seen better days. At the Ice Out event I told Tom that we needed to get together and work on buffing his car back to life. That day finally came on Saturday, August 19th, 2012.
I’ll be honest, I wasn’t sure I could save Tom’s finish using the limited buffing pads and compound that I had on hand. Since the oxidation on Tom’s car was pretty severe I would have liked to start with a more aggressive pad and compound but we sort of planned our get together at the last minute so I decided to run with what I had on hand… my Porter Cable buffer, two orange foam pads and 3M Finesse It II polishing compound. This combo isn’t terribly aggressive and is what I normally use on my own UrS4 each spring. I didn’t know if it would be enough to save Tom’s UrS6.
As with any detailing effort start with a very good car wash… and by that I mean do it by hand with soap. We used Turtle Wax T-79 Zip Wax Liquid Car Wash
but you can substitute your favorite here. Once the car is washed dry it VERY well and let it sit until all th